Master the current economic crisis with POWER-HEAT-SET
Power-Heat-Set‘s research and development department is continuously working on improving the reduction of energy consumption as well as the heat setting quality of our heat setting equipment.
The persevering endeavors have been rewarded and Power-Heat-Set proudly presents the new generation of heat setting with overheated steam, the GVA 5009 eco.
Many new developments were integrated in the new GVA 5009 eco, thus achieving further reductions of the energy consumption of approx. 40 % less than the existing GVA belt versions and better quality of the heat set yarn.
With these new developments Power-Heat-Set is able to help you to overcome the current economic crisis, because these developments will not only be integrated in the NEW GVA 5009 eco, but they also can be retrofitted to existing GVA belt versions.
New developments are:
For an improved runnability of the yarn to the coiler or the twinrollbox to ensure optimized winding after the heat set process our GVA 5009 eco has a One-Roll Capstan overfeed system.
To increase the cooling-down effect on the transport belts before re-entering the GKK and to minimize the heating-up of the belt rails the new GVA 5009 eco has a belt rail entrance with temperature insulation. The new belt rail entrance will avoid humidity loss of the yarn before the heat setting process as well as shrinking of the deposited yarn on the belt before entering the climate chamber.
A complete new system for the entry and exit of the climate chamber prevents that steam escapes from the climate chamber, thus reducing the steam consumption considerably and at the same time achieving an even more efficient steam supply.
New as well is the double insulation of the climate chamber to lower the energy loss. Thus the costs of electricity will be reduced and the double insulation will even have some influence on reducing the steam consumption.
The new GVA 5009 eco will be available as well with a central cooling station to avoid dust being stirred up during the operation and with a better heat transport to the outside. As each position has its own fan, an individual control of each position will be possible.
Do not hesitate to contact us to consult us regarding the retrofitting of your equipment or for a quotation for the NEW GVA 5009 eco. We are at your disposal any time and are looking forward to help you to master the current economic crisis with our consumption saving equipment. Attached you’ll find a sample calculation on how much savings can be achieved with the new type of GVA, respectively with a retrofitted equipment.
Call +49-8631-393480 or fax +49-8631-393580 or send an email to:
We are here to assist you!
