Since gaskets and sealings count as wear and tear parts Power-Heat-Set recommends replacing them at least once a year.
Therefore, we have created the diagram below to show exactly where the gaskets and sealings are located. In the following diagram all gaskets are marked in orange. You can find them in the HiPerBox, the air circulation fans, the underflow unit, and in the exhaust and yarn suction.
Gaskets of the HiPerBox:
All gaskets/sealings of HiPerBox 8.0+
All gaskets/sealings of HiPerBox 4.0+
HiPerBox air circulation fan
Fan (small) of underflow unit, exhaust and yarn suction
Exhaust
In order to replace the sealings and gaskets, all covers and lids must be removed and checked. If the gaskets and sealings are worn out then they need to be replaced.
If the gaskets and sealings are regularly replaced then the performance of your machine should be maintained.
If you would like any further information please feel free to contact us.
Best Regards
Your Power-Heat-Set-Team